Sunday, October 31, 2010

SolidWorks 2011 SP0.0

SolidWorks Corporation and TeAM SolidSQUAD have released the newest generation of SolidWorks 3D CAD product line - SolidWorks 2011.

What's New In SolidWorks 2011 - http://zalil.ru/29839223
Download SolidWorks 2011 -  magnet:?xt=urn:btih:76XDWSZN3L7QJCFQMKQW7UQ3EM74NTLR

Latest Pill - http://zalil.ru/29896825

47 comments:

  1. Hi, I tried this... installed OK but the crack doesn't work (swactwiz.exe)... I have put it in the correct folder etc (I've done this before) but when I open Solidworks I still get the 30 day trial screen.... Can you help? (I will check back to this message)

    ReplyDelete
  2. hI CAN YOU PLEASE PROVIDE ME LINK FOR SOLIDWOKRS 2011 SP0 32 CRACK ONLY.... I HAVE FULL SOFTWARE FOR THE SAME....

    ReplyDelete
  3. i also have crack problem... and messaged to ssq gmail adress.

    ReplyDelete
  4. hello,
    All is working correctly.. I just want to remove the message "thank you for using SolidSQUAD'S SOLIDWORKS 2011 RELEASE"...
    It's possible?

    ReplyDelete
  5. i have problems with CWFlexLM thath say´s "Select file is invalid ´Node - Locked´ lecense for CAMWorks", please helpp!

    ReplyDelete
    Replies
    1. This comment has been removed by the author.

      Delete
  6. Suddenly got a new problem today. Solidworks crashed with a Blue Screen Of Death and since then I've not been able to use the crack. When I run swlmwiz.exe I get "Error: Failed to repair TS (%d,%d,%d)". This even from a completely clean install. Help!

    ReplyDelete
    Replies
    1. Hi,

      you solved the problem ? i got the same one and it sucks ...

      Delete
    2. Hi!

      I meet this fault now and i don't know how to solve it.
      If you solved, please introduct me.
      My mail: myvan09032008@gmail.com
      Please help me. I'm very needing

      Delete
  7. SolidQUAD, thank you for posting a crack for sldwrks. I installed it and it was working perfectly until today. I start the program, it starts loading and after the message "ty for using solidSQUAD...." the program closes itself.
    I've checked it and the processes disappear from the task manager after the message. Please help! D=

    ReplyDelete
    Replies
    1. Dude, did you find a way to fix the program closing itself?? I have the same problem here...

      Delete
    2. you have to run swactwiz.exe located in C:\Program Files\SolidWorks Corp\SolidWorks\setup\i386

      Delete
    3. thanks jose, that solve the problem

      Delete
  8. Okay - bit of an update. I disabled UAC on windows 7 x64 Ultimate and now I get a different error. When I install Solidworks I get asked to activate and when I cancel it gives an error that no valid licences can be found - then continues to install. When I run the SSQ swlmwiz.exe or swactwiz.exe I now get "Error: Can not populate existing licenses (%d %d %d)" - I seem to be missing something here...

    ReplyDelete
  9. I tried again after removing the most recent windows updates, from an uncompressed ISO on my hard disk and now I'm back to the "Error: Failed to repair TS (%d,%d,%d)" message.

    Starting to pull my hair out, although I did manage to install this on my old Win XP x64 machine, so I have a lifeline for now.

    ReplyDelete
    Replies
    1. Hi, I'm Shankar. I also have the same error with SW2011 SP0. Were you able to solve this problem? Please help me. I have only one computer. If possible please write me your suggestion to shankkr@gmail.com
      Thank you.

      Delete
  10. SoldSquad, thanks a lot for your excelent stuff !!
    I would like to request the full tutorials on this page:
    http://www.packagingschool.com/Products

    To download and watch on HQ offline.

    Solidworks Essential, Advanced, and if possible also the Artioscad Essential and Designer. There are no artioscad video tutorials outthere, this will be the first.

    PLEASE !!!

    ReplyDelete
  11. hey, how do i upgrade from 2011 SP0 to SP2??

    ReplyDelete
  12. Installed, and cracked as the info says, but when I try to open it, I cannot choose part, assembly or drawing, only cancel button works, and it won't even open an existing document...what the hell? Your 2009 release was working flawlessly. Also, I have another version EN-RU, which won't even install, stops at 5% and says it cannot access mmodules.cab... solution please?

    ReplyDelete
  13. i've been trying to install but none of those 3 serials are working. any new ones available?

    ReplyDelete
  14. I start the program, it starts loading and after the message "ty for using solidSQUAD...." the program closes itself.
    I've checked it and the processes disappear from the task manager after the message. Please help!

    ReplyDelete
    Replies
    1. Dude, did you find a way to fix the program closing itself?? I have the same problem here...

      Delete
    2. Try to launch swactwiz.exe ( the cracked one) again. Maybe this will reset the trial period ...

      Delete
    3. I solved launching C:\Program Files (x86)\SolidWorks Corp\SolidWorks\setup\i386\swactwiz_s.exe

      Delete
    4. I had the same problem - but I had to run swactwiz (not swactwiz_s) in the install file location for s/w - a couple of pop up's came saying "thank you for using ..." and then the second said "trail reset sucessfully! Performing activation" OK'd that a third pop up said "all done, enjoy" all all is well ..
      Hope this helps
      Eeyore

      Delete
    5. thank you so much Eeyore, this worked fine!

      Delete
    6. thanks eeyore!! btw after the 3rd popup dont forget to run solidworks again..

      Delete
  15. where are you ppl finding the proper installment instructions at? can someone please provide a link of some sort. or at least point me in the right direction. would greatly appreciate it. i've trying for the past 2 months to get this on my HP8730 x64 for the longest. so please understand my frustration to get this going. thank you.

    ReplyDelete
  16. canu plz provide the link only with crack...i hav the whole software..plz..thank u..!

    ReplyDelete
  17. Good evening,

    When I start solidworks the key activation ask me to activate produce now and after 30 days as before. I have done a bad manip...

    Can you help me ?

    Sorry for my bad english and best regards

    ReplyDelete
    Replies
    1. Hi, I have the same problem and I found solution:
      "Keep in mind that this SSQ's crack is nothing more than possibility to restart SW2011 SP0.0 30-day trial at any time..
      So in a 30 day you will need to run crack again (to re-activate trial)..
      You can do it by running ..\setup\i386\swlmwiz.exe
      or
      by running Start > All Programs > SolidWorks 2011 > SolidWorks Tools > SolidNetWork License Manager"

      http://www.sharevirus.com/viewtopic.php?f=11&t=107867

      ...it works :)

      Delete
  18. My problem is the same from Vicious and fanstard. It was working properly for 4 months, then I needed to reinstall it. I cleaned all folders and registry before reinstalling (found a manual to uninstall properly), then installed and cracked it, but when I open SLDWORKS.exe, I receive the message "Thank you for using SolidSQUAD's SolidWorks 2011 release!", click OK, and the program closes itself. What can be wrong?

    ReplyDelete
  19. Does ANYBODY reply to the questions here?

    Got the same problem "Error: Can not populate existing licenses (%d %d %d)"

    Somebody fixed this and wants to tell me how?

    ReplyDelete
  20. Hi,
    Some weeks ago SW2011 Sp0 worked without any failure, but since a couple of days I can´t start it. I tried to reinstall the software but the installation is not going on uper 25%. In the first the IM tells me that the serial doesnt exist.
    Can you help me please?

    ReplyDelete
  21. Hi, Thanks for your work. I loaded your SolidSQUADs SW11 and worked great for a month or so but now only gets to thankyou for using s------ and then will not go any futhure. Guess it is a trail version. Can you help

    ReplyDelete
  22. Did you dl the 64 bit or the 32 bit? Which is your computer? I had this problem but I fixed it. The 64 bit comes with instructions how to fix it. Shoot me an email if you are still having this problem. dhersey623@hotmail.com

    ReplyDelete
  23. Hello

    What kind of personal and license information is saved in part files created with a cracked version of SW or NX?
    I mean, can someone inspect the files I create and know that were produced without a purchased license?
    For example if I take part in a competition.

    regards

    ReplyDelete
  24. Has anyone gotten an
    Error: failed to delete product (%d %d %d)
    Pissing me off. I cant activate cause that error shows up as soon as i start the activator and hit yes 1 time. any fixes?

    ReplyDelete
    Replies
    1. I have exacly the same problem even in 2012... now I cant usa a single solidworks

      Delete
  25. can i have the serial number for flow simulation?

    ReplyDelete
  26. Has anyone gotten an
    Error: failed to delete product (%d %d %d)
    Pissing me off. I cant activate cause that error shows up as soon as i start the activator and hit yes 1 time. any fixes?

    ReplyDelete
  27. hi jaki,
    i have the same problem.
    did you find something to solve it?
    thanks
    jeh

    ReplyDelete
  28. Is anyone solved the save/open issues? when u open or save your file the program crashes..

    I am using Win 8.. there is no Visual Themes option on the compatibility tab.. anyone have a solution?

    For Win 7 64bit, goto to compatibility-> disable "Visual Themes".

    ReplyDelete
  29. Win7 64bit Installation Guide..

    1. Drag and drop the Leer file into Notepad, it will show instructions (but not all work).
    2. On the image disk, navigate to sldim/sldim.exe and right-click, then update the Compatibility settings to run with Windows XP SP3. Apply and OK.
    3. Turn off internet connection.
    4. Start the installer (in the sldim directory, not setup.exe in the main directory).
    5. I used serial # 0001-0001-0736-0361-JK3Q-HDJ3.
    6. Click Cancel when it warns you that it can't check the serial number without an internet connection.
    7. Continue the installation.
    8. When complete, take the files from the i386 folder in the torrent (NOT from the image disk contents), and copy those four files to /setup/i386.
    9. To even get the program to start, I also had to disable visual themes on the SW2011 exe shortcut itself, as well as run in compatibility with Windows XP SP3.
    10. When you start up SW2011, you should see a prompt saying thanks for using SolidSQUAD release, and it should be all activated. Good luck!

    ReplyDelete
  30. I'm thinking of buying a laptop.But the laptops with quadro Fx series are too expensive to suit my budget.I would like to know the alternative graphics card other than Quadro FX or equivalent for cheaper price..

    Solidworks Training

    ReplyDelete